Zmaj Jovina bb, 23271 Kumane, Republic of Serbia
EN
SR

Marine jet

Specifications:
Payload, kg: 352
Empty trailer mass, kg: 148
Total mass, kg: 500
Usable dimensions, mm: 3500x1600
Trailer dimensions, mm: 4123-4523x1600x800
Number of axles: 1
Type of axles: Unbraked
Wheels: 155/80R13
Plug: 7-pin
Load capacity per axle, kg: 750
123.000 RSD
Commercial offer
  • Galvanized steel frame is made of closed profiles and has a large safety margin. The curved design of the cross members ensures the lowest possible descent of the boat, lowering the center of gravity, and increasing trailer stability during transport. 

  • Load securing loops (4 pieces) are located on the side of the frame for the most convenient boat fixation, taking into account its model.

  • The front boat cradle has adjustable height. The winch facilitates loading the boat onto the trailer and secures it during launching. 

  • Mobile skis for boat support, made of steel hot-dip galvanized sheet, coated with a polymer coating, can be installed anywhere over the frame. They have an adjustable tilt angle and adjustable height, allowing you to place them in the most convenient position and lower the boat as much as possible, ensuring trailer stability during movement and launching in shallow waters. During transport and storage of the boat on the trailer, skis allow you to evenly distribute the weight of the equipment and reduce pressure on the boat's hull. 

  • The possibility of adjusting the axle position allows you to adjust the location of the axle and install it under the center of mass of the transported boat. Proper load distribution on the trailer ensures safe transport, avoids exceeding the allowed load on the towing vehicle hitch, and prevents tilting the trailer backward when transporting a boat with a motor. 

  • Torsion suspension maintains a stable, smooth ride with various trailer loads. Built-in torsion axles are of the KNOTT brand. 

  • The galvanized axle is designed for a load of 750 kg, the hubs are equipped with protective caps, bearings do not require additional lubrication and adjustment throughout the entire working life. The torsion axle is of the KNOTT brand.
    Removable supports with rear lights prevent submersion of the lighting signal in water and ensure its safety. 

  • The electrical installation is made of molded automotive cable with molded connectors and molded bayonet connectors. A 7-pin plug is installed. The complete electrical installation on the trailer is of the Aspöck brand. 

  • Anti-corrosion protection by hot galvanizing is much more effective than other forms of metal surface protection. It provides reliable protection against corrosion on external surfaces as well as inside the cavities of the construction, significantly extending the trailer's lifespan.

Accessories

Jockey Wheel TK48

Galvanized support wheel (ø 48mm) with axial bearings, complete with a clamp, brand KNOTT.
Height-adjustable, ensures the horizontal position of the trailer and facilitates its movement without a towing vehicle.
Static load capacity – up to 150 kg
Dynamic load capacity – up to 90 kg

Standard equipment
LED Signal Lights
The set consists of LED technology rear signal lights and front clearance lights, branded ASPOECK.
Standard equipment
Spare wheel with holder Marine

The set includes:

  • galvanized spare wheel holder for installation under the trailer platform, easy to assemble/disassemble
  • wheel 165R13C

10.900 RSD
Mudgard made of stainless steel

Metal fenders, made of stainless steel, corrosion-resistant to salt and fresh water.

3.800 RSD
Waterproof axle

Knott brand torsion axle, where all components are hot-dip galvanized, including hubs and oscillating arms. The hubs are completely sealed and equipped with tapered bearings, which are oil-lubricated. The oil level can be checked through the transparent cover on the hub. It may be necessary to top up the oil.

5.600 RSD

Recently viewed

×
If you want us to call you, please leave your phone number